Xbee default
From Attie's Wiki
Revision as of 21:42, 15 March 2010 by 192.168.0.1 (Talk)
Follow the below sequence to set an XBee to good default settings:
+++ ATRE ATBD6 ATWR ATFR +++ ATMYFFFF ATNI_ ATCH_ ATD50 ATD70 ATAP2 ATWR ATFR
Note: When changing channels you should always connect directly to the XBee and always write (ATWR) and reset (ATFR) immediately otherwise it tends to wander off!!
