OpenOCD
From Attie's Wiki
Contents |
Download
From git: git://openocd.git.sourceforge.net/gitroot/openocd/openocd
Source: http://sourceforge.net/projects/openocd/files/openocd/
Build
Git
# checkout the latest release tag (it may have changed!) git co v0.5.0 # bootstrap ./bootstrap # configure ./configure --enable-maintainer-mode
Source Package
# configure ./configure
Build
make
Install
sudo make install
Usage
Note: When flashing an image, use the 5v power supply, as USB cannot provide enough current
halt | halt... |
reset | reset... |
exit | exit... |
flash write_image erase <image> <address> | put <image> into flash at <address> |
Errors
flash failed
auto erase enabled lm3s.cpu -- clearing lockup after double fault error -302 executing stellaris flash write algorithm flash writing failed with CRIS: 0x0 error writing to flash at address 0x00000000 at offset 0x00000000 in procedure 'flash'
This can occur due to under-current (powered by USB). Either try again, or power using a 5v supply.