Crosstool-ng

Building

You will need to install some packages:

apt-get install gperf texinfo libtool automake

./configure
make
sudo make install

Using

To keep a cache of the downloaded sources, do the following

mkdir ~/src

Then configure and build the toolchain!

# pick a default config, or make your own from scratch!
cp ${CROSSTOOL_NG_SRC}/samples/${CHOSEN_SAMPLE}/crosstool.config .config
 
# review / change options
ct-ng menuconfig
 
# build
ct-ng build

If everything went smoothly... have a look in ~/x-tools/ (or elsewhere if you changed PREFIX_DIR)

$ ls -l /home/agrande/x-tools/
total 4
dr-x------ 8 agrande agrande 4096 2012-07-27 14:13 arm-bare_newlib_cortex_m3_nommu-eabi