Crosstool-ng
From Attie's Wiki
(Difference between revisions)
m (→Building) |
m (→Building) |
||
Line 8: | Line 8: | ||
<source lang="bash"> | <source lang="bash"> | ||
− | ./configure | + | ./configure --prefix=../crosstool |
make | make | ||
− | + | make install | |
</source> | </source> | ||
Revision as of 18:07, 7 February 2013
Building
You will need to install some packages:
apt-get install gperf texinfo libtool automake bison flex gawk cvs zlib1g-dev
Download from: http://crosstool-ng.org/download/crosstool-ng/
./configure --prefix=../crosstool make make install
Using
To keep a cache of the downloaded sources, do the following
mkdir ~/src
Then configure and build the toolchain!
# pick a default config, or make your own from scratch! cp ${CROSSTOOL_NG_SRC}/samples/${CHOSEN_SAMPLE}/crosstool.config .config # review / change options # PREFIX_DIR should be an absolute path (as of writing you can use $(pwd) to make it 'relative') ct-ng menuconfig # build ct-ng build
If everything went smoothly... have a look in ~/x-tools/
(or elsewhere if you changed PREFIX_DIR
)
$ ls -l /home/agrande/x-tools/ total 4 dr-x------ 8 agrande agrande 4096 2012-07-27 14:13 arm-bare_newlib_cortex_m3_nommu-eabi