Bus pirate

From Attie's Wiki
(Difference between revisions)
Jump to: navigation, search
m
m (Pinout)
 
Line 29: Line 29:
 
==BusPirate v4==
 
==BusPirate v4==
 
====Pinout====
 
====Pinout====
 +
{{warning|This pinout is for the Seeed Studio probe kit ([http://www.seeedstudio.com/depot/bus-pirate-v4-probe-kit-p-1496.html here]), but my ribbon is connected the opposite way to what is shown in their photo - my pin 1 is White, then Black, Brown, Red, as shown below}}
 
{|
 
{|
 
! Pin !!colspan="2"| Color                                  !! Signal !! HiZ !! 1-Wire !! UART !! I2C !! SPI  !! JTAG
 
! Pin !!colspan="2"| Color                                  !! Signal !! HiZ !! 1-Wire !! UART !! I2C !! SPI  !! JTAG

Latest revision as of 11:57, 2 December 2013

Contents

[edit] BusPirate v3

Baud rate: 115200

[edit] Pinout

Pin Color Signal HiZ 1-Wire UART I2C SPI JTAG
1 black GND - - - - - -
2 white 3.3V - - - - - -
3 grey 5V - - - - - -
4 purple ADC - - - - - -
5 blue Vpu - - - - - -
6 green AUX - - - - - -
7 yellow CLK - - - SCL CLK TCK
8 orange MOSI - OWD Tx SDA MOSI TDI
9 red CS - - - - CS TMS
10 brown MISO - - Rx - MISO TDO

[edit] BusPirate v4

[edit] Pinout

WARNING: This pinout is for the Seeed Studio probe kit (here), but my ribbon is connected the opposite way to what is shown in their photo - my pin 1 is White, then Black, Brown, Red, as shown below
Pin Color Signal HiZ 1-Wire UART I2C SPI JTAG
1 white1 MOSI - OWD Tx SDA MOSI TDI
2 black1 CLK - - - SCL CLK TCK
3 brown MISO - - Rx - MISO TDO
4 red CS - - - - CS TMS
5 orange AUX0 - - - - - -
6 yellow AUX1 - - - - - -
7 green AUX2 - - - - - -
8 blue ADC - - - - - -
9 purple Vextern - - - - - -
10 grey 3.3V - - - - - -
11 white2 5V - - - - - -
12 black2 GND - - - - - -

[edit] Other Useful Pages

Connecting ATmega328p for use with avrdude
Using SPI mode

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox