Xbee
From Attie's Wiki
(Difference between revisions)
Line 52: | Line 52: | ||
<h3>Tn - IO timeout</h3> | <h3>Tn - IO timeout</h3> | ||
− | default: <font color="#F00">0xFF</font> | + | default: <font color="#F00">0xFF</font><br> |
− | range: 0x0 - 0xFF [x 100msec] | + | range: 0x0 - 0xFF [x 100msec]<br> |
for I/O passing only | for I/O passing only | ||
Line 59: | Line 59: | ||
<h3>DH & DL - destination address</h3> | <h3>DH & DL - destination address</h3> | ||
− | default: <font color="#F00">0x00</font> | + | default: <font color="#F00">0x00</font><br> |
range: 0x00 - 0xFFFF FFFF | range: 0x00 - 0xFFFF FFFF | ||
Line 68: | Line 68: | ||
<h3>IA - I/O address</h3> | <h3>IA - I/O address</h3> | ||
− | this address is permitted to pass its IO pins to this modules IO pins | + | this address is permitted to pass its IO pins to this modules IO pins<br> |
− | default: <font color="#F00">0xFFFF FFFF</font> | + | default: <font color="#F00">0xFFFF FFFF</font><br> |
− | set to 0xFFFF FFFF to deny all changes | + | set to 0xFFFF FFFF to deny all changes<br> |
set to 0xFFFF to accept all changes | set to 0xFFFF to accept all changes | ||
<h3>IC - I/O detect</h3> | <h3>IC - I/O detect</h3> | ||
− | default: <font color="#F00">0xFFFF FFFF</font> (disabled) | + | default: <font color="#F00">0xFFFF FFFF</font> (disabled)<br> |
bitfield, when the pin changes a sample will be taken and send | bitfield, when the pin changes a sample will be taken and send | ||
<h3>IR - sample rate</h3> | <h3>IR - sample rate</h3> | ||
− | default: <font color="#F00">0x0</font> | + | default: <font color="#F00">0x0</font><br> |
range: 0x0 - 0xFFFF [x 1msec] | range: 0x0 - 0xFFFF [x 1msec] | ||
<h3>IT - samples before TX</h3> | <h3>IT - samples before TX</h3> | ||
− | default: <font color="#F00">0x1</font> | + | default: <font color="#F00">0x1</font><br> |
range: 0x0 - 0xFF | range: 0x0 - 0xFF | ||
Revision as of 19:41, 25 March 2010
This page has random bits and bobs about the XBee...
See Also
manual
XBee default configurations
Useful AT Commands
BD - baud rate
! bps | |
---|---|
0 | 1200 |
1 | 2400 |
2 | 4800 |
3 | 9600 |
4 | 19200 |
5 | 38400 |
6 | 57600 |
7 | 115200 |
CH - channel
default: 0x0C
XBee | 0x0B - 0x1A |
XBee Pro | 0x0C - 0x17 |
Dn - IO
0-4 | 5 | 6 | 7 | 8 | |
---|---|---|---|---|---|
0 | disabled | disabled | disabled | disabled | disabled |
1 | n/a | Associated | RTS | CTS | n/a |
2 | ADC | ADC | n/a | n/a | n/a |
3 | DI | DI | DI | DI | DI |
4 | DO low | DO low | DO low | DO low | n/a |
5 | DO high | DO high | DO high | DO high | n/a |
Tn - IO timeout
default: 0xFF
range: 0x0 - 0xFF [x 100msec]
for I/O passing only
SH & SL - source address
DH & DL - destination address
default: 0x00
range: 0x00 - 0xFFFF FFFF
DN - destination node
tries to set DH & DL to the address of the node name specified
FR - firmware reset
IA - I/O address
this address is permitted to pass its IO pins to this modules IO pins
default: 0xFFFF FFFF
set to 0xFFFF FFFF to deny all changes
set to 0xFFFF to accept all changes
IC - I/O detect
default: 0xFFFF FFFF (disabled)
bitfield, when the pin changes a sample will be taken and send
IR - sample rate
default: 0x0
range: 0x0 - 0xFFFF [x 1msec]
IT - samples before TX
default: 0x1
range: 0x0 - 0xFF
IS - force sample
IU - I/O UART output enable
default: <cont color="#F00">0x1</font>
ND - node discover
returns a list of nodes and their address
NI - node identifier
sets the node's name
RE - restore defaults
don't forget to use with WR