DK-LM3S9B96
From Attie's Wiki
(Difference between revisions)
m (→Flashing with OpenOCD) |
m (→Flashing with OpenOCD) |
||
| (3 intermediate revisions by one user not shown) | |||
| Line 34: | Line 34: | ||
==Flashing with OpenOCD== | ==Flashing with OpenOCD== | ||
{{note|You will need to build OpenOCD with the <code>--enable-ft2232_libftdi</code> configure flag specified and <code>libftdi1</code> and <code>libftdi-dev</code> installed}} | {{note|You will need to build OpenOCD with the <code>--enable-ft2232_libftdi</code> configure flag specified and <code>libftdi1</code> and <code>libftdi-dev</code> installed}} | ||
| + | |||
| + | See [[OpenOCD]] for support. | ||
| + | |||
| + | <source lang="bash"> | ||
| + | sudo openocd -f /usr/local/share/openocd/scripts/interface/luminary.cfg -f /usr/local/share/openocd/scripts/target/stellaris.cfg | ||
| + | </source> | ||
Latest revision as of 17:30, 27 July 2012
Contents |
[edit] Preparation
- Build a toolchain. See Crosstool-ng, and use the
arm-bare_newlib_cortex_m3_nommu-eabiconfig. - Build OpenOCD
[edit] Environment
export PATH=${TOOLCHAIN_DIR}/bin:${PATH} export CROSS_COMPILE=arm-bare_newlib_cortex_m3_nommu-eabi-
[edit] Using TI's StellarisWare and Samples
- Download from: http://www.ti.com/tool/sw-lm3s (or look for an update / new page)
- Extract the contents of the windows executable.
mkdir sw cd sw unzip ../SW-*.exe rm ../SW-*.exe
- Edit the
PREFIXvariable in makedefs. E.g:
PREFIX=${shell echo -n ${CROSS_COMPILE} | rev | cut -b 2- | rev}
- Build:
- You make need to remove the build sections that target the Cortex-M4 from the following files:
-
./driverlib/Makefile -
./grlib/Makefile -
./usblib/Makefile
-
- The entire source tree won't build, due to Cortex-M4 boards, at this point, move into your board specific directory, and continue from there.
- You make need to remove the build sections that target the Cortex-M4 from the following files:
make clean all[edit] Flashing with OpenOCD
Note: You will need to build OpenOCD with the
--enable-ft2232_libftdi configure flag specified and libftdi1 and libftdi-dev installedSee OpenOCD for support.
sudo openocd -f /usr/local/share/openocd/scripts/interface/luminary.cfg -f /usr/local/share/openocd/scripts/target/stellaris.cfg
