Avr-gcc
From Attie's Wiki
(Difference between revisions)
Line 41: | Line 41: | ||
avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m168 -U flash:w:example.hex | avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m168 -U flash:w:example.hex | ||
</pre> | </pre> | ||
+ | |||
+ | <h2>sample source</h2> | ||
+ | |||
+ | <h3>blink</h3> | ||
+ | <source lang="c"> | ||
+ | /* 8 Mhz cpu */ | ||
+ | #define F_CPU 8000000UL | ||
+ | |||
+ | /* led pin */ | ||
+ | #define LED 0b00100000 | ||
+ | |||
+ | #include <util/delay.h> | ||
+ | #include <avr/io.h> | ||
+ | |||
+ | int main(void) { | ||
+ | /* set port b direction register to output for led pin */ | ||
+ | DDRB = LED; | ||
+ | while(1) { | ||
+ | |||
+ | /* turn led off */ | ||
+ | PORTB &= ~LED; | ||
+ | _delay_ms(450); | ||
+ | |||
+ | /* turn led on */ | ||
+ | PORTB |= LED; | ||
+ | _delay_ms(50); | ||
+ | } | ||
+ | } | ||
+ | </source> | ||
<h2>other commands</h2> | <h2>other commands</h2> | ||
Line 46: | Line 75: | ||
<code> | <code> | ||
avr-size example.elf | avr-size example.elf | ||
+ | avr-gcc --help=optimizers | ||
</code> | </code> | ||
Revision as of 01:02, 25 March 2010
How to setup avr-gcc and get compiling for an Arduino!
$ yum install avr-gcc avr-libc avr-binutils avrdude
Contents |
avrdude
For ATMega168:
$ avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m168
For ATMega328p:
$ avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m328p
Terminal mode: -t
. Use command part
to see detailed part information.
To upload file: -U memtype:op:filename[:format]
makefile
simple
Just produces the .elf and .hex file. Also optimizes for space (HUGE difference)
all: avr-gcc avr.c -mmcu=atmega168 -o example.elf -Wall -Os avr-objcopy -j .text -O ihex example.elf example.hex avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m168 -U flash:w:example.hex
complex
produces .o, .asm, .map and .lst files too
all: avr-gcc -g -mmcu=atmega168 -c avr.c -Wa,-alh,-L -o avr.o > avr.asm avr-gcc -g -mmcu=atmega168 -Wl,-Map,example.map -o example.elf example.o avr-objdump -h -S example.elf > example.lst avr-objcopy -j .text -j .data -O ihex example.elf example.hex avrdude -c buspirate -P /dev/ttyUSB1 -x speed=3 -p m168 -U flash:w:example.hex
sample source
blink
/* 8 Mhz cpu */ #define F_CPU 8000000UL /* led pin */ #define LED 0b00100000 #include <util/delay.h> #include <avr/io.h> int main(void) { /* set port b direction register to output for led pin */ DDRB = LED; while(1) { /* turn led off */ PORTB &= ~LED; _delay_ms(450); /* turn led on */ PORTB |= LED; _delay_ms(50); } }
other commands
avr-size example.elf
avr-gcc --help=optimizers
resources
http://arduino.cc/en/Hacking/PinMapping168
https://www.mainframe.cx/~ckuethe/avr-c-tutorial/
http://hintshop.ludvig.co.nz/show/buspirate-avr-programming/
http://itp.nyu.edu/physcomp/uploads/6pinAVRproghead.jpg
http://dangerousprototypes.com/bus-pirate-manual/